Re:

[Jerry A! <jerry@xxxxxxxxxxx>]

On Sun, Dec 07, 2003 at 10:01:29PM -0500, Jerry A! wrote:
: On Sun, Dec 07, 2003 at 01:05:27PM -0500, John E. Davis wrote:
: : Jerry A! <jerry@xxxxxxxxxxx> wrote:
: : >However, when using jed, the entire file shows up in the diff file.
: : >And the file sizes change by ~1k.  Here's an example:
: : 
: : This sounds like a CR/NL problem.  Are you editing the file on a linux
: : system?  Does the file have lines that end in CR or CR/NL?  When you
: : edit the file with jed, does a C or L show up near the left edge of
: : the buffer's status line?  If so, which one?  I suspect that at least
: : on of the lines has a line that ends in CR.  If my suspicion is
: : correct, how significant is the embedded CR.
: : 
: : Finally, if you see a 'C' on the status line, then do
: : 
: :    ESC-x toggle_crmode
: 
: No luck here.  There was indeed a "C" in the status bar.  I ran the
: 'toggle_crmode' function and the C went away.  However, I still saw
: similar results.  Here's the size output:
: 
:     install.bin         40294195
:     install.bin (w/C)   40499456
:     install.bin (w/o C) 40499456
: 
: Any other ideas?

Sorry to respond to myself.  I made a boo-boo.  The size of the file
after running the 'toggle_crmode' function should be 40293390 not
40499456.  :(

        --Jerry
        
-- 
"In argument, truth is discovered."
        -- Old Russian Proverb

--------------------------
To unsubscribe send email to <jed-users-request@xxxxxxxxxxx> with
the word "unsubscribe" in the message body.
Need help? Email <jed-users-owner@xxxxxxxxxxx>.